International Journal Publications
Dr. Abhijeet Auti
1. Domestic solar water desalination system In Energy Procedia , ISSN:18766102,Vol-14,201,ELSEVIER,DOI : 10.10.16.j.egypro.
2. Numerical Solution of Ordinary Differential Equation Using Single MATLAB Algorithm in International Journal of Mathematics Research,ISSN 0976-5840,Scopus Indexed.
3. Thermal analysis of parabolic concentrator for finding optical efficiency by different methods with varying parametersin International Journal of Engineering and Technology, ISSN : 0975-4024 Vol 5 No 2 Scopus Indexed.
4. Theoretical, Experimental and Finite Element Analysis of heat loss for designing a parabolic concentrator in International Review of Mechanical Engineering,ISSN : 1970-8734 Scopus Indexed.
5. Solar water desalination system WITH condenser without using electricity for rural areas in American Journal of Applied Science,ISSN: 1553-3468©2012 Science Publication doi:10.3844/ajbb.2012 Scopus Indexed.
6. CFD analysis of condensor for solar desalination system in International Review of Mechanical Engineering, ISSN: 1970-8734 Scopus Indexed.
7. Design and manufacturing of absorber for solar desalination system in Advanced Material Research,Doi:10.4028/ www.scientific.net/AMM.446-447.716 Scopus Indexed.
8. Prediction of Pressure Drop in Chilled Water Piping System Using Theoretical and CFD Analysis in International Journal of Engineering and Technology, ISSN : 0975-4024Scopus Indexed.
9. Study on reflector material optimization of a parabolic solar concentrator in LNEE series Springer, Scopus Indexed.
10. Review of different solar water heating systems in Internationals Journal of Applied Engineering Research ,Scopus Indexed.
11. Thermal and Structural Analysis of Stainless Steel 304 for Thermal Fatigue Testing using ANSYS in International Review of Mechanical Engineering,ISSN: 1970-8734Scopus Indexed.
Prof. Gund Pujari P.S.
1. Smart Antenna Using Switched Beam Array in IJAIEM, Impact Factor 2.379.
2. Implementation of Smart Antenna Using Buttler Matrix in IJAMTES.
Prof. Pawar S. D.
1. A formation on cancellation of current harmonics in Three phase Four Wire system using Smart Filter in International Journal of informative & Futuristic Research, ISSN No.2347-1697 DOI NO: IJIFR/V3/ E11/ 045,Impact factor:4.781.
2. Removal of Current & voltage Harmonics in 3 Phase 4 wire System using Smart Filter in International Journal of Advanced Research in computer & communication Engineering.ISSN No.2278-1021, DOI NO10.17148/IJARCCE.2016.5953,Impact factor:5.332.
1. Identifying Quadratic Residuity Using Legendre-Jacobi Symbol in International Journal of Innovative Research in Science,ISSN No. 2319-8753, Impact factor:5.332.
2. Traditional Cryptography: A Mathematical overview in International Journal of Innovations in Engineering and Technology (IJIET), ISSN: 2319 - 1058.
3. ComparativeStudy on Integer Factorization Algorithm-Pollard's RHO and Pollard's P-1, IEEE Explore, ISSN 0973-7529.
4. An overview to Integer factorization and RSA in Cryptography in International Journal For Advance Research In Engineering And Technology, ISSN 2320-6802.
5. RSA and ELGamal Cryptosystem: An Overview inInternational Journal of Computer Science and Mobile Applications,ISSN: 2321-8363.
Prof Vikhe N.B
1. QueRIE:System for personalized Query Recommendation in IJIFR,ISSN: 2347-1697 Impact factor: 3.059.
1. Denial of Sevice attack detectionin IJIRAE,ISSN: 2349-2163 Impact factor: 2.469.
2. Layered architecture for DoS attack detection system by combine approach of Naive bayes and Improved K-means Clustering Algorithm in IJIRAE,ISSN: 2395-0056 Impact factor: 4.45.
Prof. Londhe D. R.
1. Product Aspect Ranking on the Consumers Reviews and Its Applicationsin IJARCCE,ISSN: 2278-1021 Impact factor: 5.332.
2. Product Aspect Ranking on the Consumers Reviews in IJARIIE,ISSN: 2395-4396
Prof. Narkhede S. S.
1. Kisan Monitoring System Focused on Android based Application in IRJET,ISSN: 2395-0056 Impact factor: 4.45
1. Diesel Engine Exhaust Gas Recirculation A Review in IJRTS,ISSN: 2348-1439 Impact factor:1.936
2. Performance of Diesel engine with EGR system in IJIERT, ISSN: 2394-3696 Impact factor: 2.776
3. Effect of exhaust gas recirculation (EGR) on the performance and emission characteristics of diesel engine in IJAER,ISSN: 2231-5152 Impact factor: 1.8233
4. A Review on performance of Diesel engine with heat exchanger in IJESR,ISSN: 2277-2685 Impact factor: 3.47
1. Optimization of the parameter in Austenitic stainless steel rod AISI 317 L by Taguchi method -A review in IIIERT, ISSN:2394-3696 Impact factor: 3.535
1. Bending stress analysis of spur gear by using modified Lewis formula,ISSN: 2348-7550 Impact factor: 2.87.
1. Review of custom made implant in IJRASET, ISSN: 2321-9653 Impact factor: 5.969
1. CFD Analysis and comparison of Fluid flow through a single hole orifice and multihole orifice platein IJRAT,ISSN: 2321-9637 Impact factor: 2.865.
1. Review of EDM process,ISSN: 2321-9637 Impact factor: 2.865
1. Role of Technical Education in Development of human Resources for preparedness and Management of Disasters in Research Approach -An interdiciplinary Journal of Research, ISSN No:2395-4191.
1. Analysis of custom made implant using FEA in Scientia Research Library,ISSN No:2348-0428.
1. Manufacturing and Testing of Parabolic Solar Cooker in ITECH-09, International Conference, Amrutvahini college of Engg.Sangmner.
2. Optimization of surface Roughness for Hard Material using high speed Machining in ICRAME 2011, International Conference, Dr.M.G.R Educational and Research Institute, Chennai,2011.
3. Solar Energy Using Parabolic Concentrator in ICRAME 2011 ,International Conference, Dr.M.G.R Educational and Research Institute, Chennai,2011.
4. Domestic Solar Water Desalination System in 2011 2nd International Conference on Advances in Energy Engineering (ICAEE), 27-28 December 2011, Bangkok, Thailand.
5. Optimization of absorber for domestic solar desalination system using experimental and FE analysis in 4th Nirma University International Conference on Engineering, Gujrat 2103.
6. Secured Automatic Car Parking system using Image Processing in International Conference on Advanced Communication, Control and Computational Technologies Syed Ammal Engineering College, Ramanathpuram, TN, India.
Prof. BanberuSagar S.
1. Node Voltage Regulation and Line Loss Minimization in A Loop Distribution System Using UPFC in International Conference on Conversions of Technology (IEEE Bombay Section),Pune, MH, India.
1. Data Hiding by codeword substitution in IJERT
1. A review paper on background extraction in IJSER
2. Efficient foreground extraction using Spatio-temporal de-correleted block features in ICECESS-16
1. Smart Antenna using Switched Multibeam Array,ICCTCMECAT
Prof D.M. Nikumbh
1. Analysis of Distance based routing protocol using shortest path algorithm in Sahyadri International Journal.
2. A surevy of positioned based routing protocol in VANET in IJMER.
3. Analysis of Distance based routing protocol in VANET in INDICOM 2014(IEEE)
Prof A.W. Khan
1. Investigation for Base Shear and Roof Displacement for Multi-Storey Building with Different Location of Shear Wall Using STAAD Pro.
1. Real Time Sign Language Recognition using Leap Motion Controller in ICICT-2016 Coimbtore, Tamilnadu
2. ANN based Indian Sign Numerals Recognition using Leap Motion Controller in in ICICT-2016 Coimbtore, Tamilnadu
3. Novel Feature Extraction Technique for Indian Sign Language Recognition using Energy Compaction of Cosine Transform in I2CT-2014 NCMOC-2015.
4. Appraise of various color spaces for skin detection based background removal from hand sign images in I2CT-2014 NCMOC-2015
1. DoS attack detection Sytem by combine approach of Naive bayes and Improved K-means Clustering Algorithm in ICTRPCS2015 G.H.RaisoniCOE,Ahmenagar.
1. Blends of Biodiesel as an alternative fuel for CI enginesin Search and Research Youth Conclave-2015 NITTTR.
2. An experimental study of effect of exhaust gas recirculation on the performance and emission characteristics of Diesel enginein 4th international conference Challenges in environmental Sagarand science Technology.
1. Optimization of the parameter in Austenitic stainless steel rod AISI 317L by Taguchi method -A reviewin ICITDCEME'SAhmednagar.
1. Bending stress analysis and spur gear by using modified Lewis formula in ICETEMR-2016 Nashik
1. Mechatronics, need for the new Technology in National Conference, College of Engineering, Wadia College Campus, Pune .June 2011.
Prof. Khan R.L.
1. Secured Automatic Car Parking system using Image Processing in Recent Trends in Instrumentation and Control Engineering (RITE-2010),P.D.V.V.P.COE,Ahmadnagar.
2. Robust cascade control system design for control air conditioning system in National Conference on Electronics Communication and Information Security (NCECIS-2011).
3. Study of Different tuning methods for first order process with delay timein national Conference on Recent Advances in Mechanical Engineering(RAME-15),P.D.V.V.P.COE,Amadnagar.
4. Smart Building Sensing and activation to Improve Energy Efficiencyin National Conference on Role of engineers in Development of Smart cities P.D.V.V.P.COE,Amadnagar.
1. An application of Image Processing technique in mango leaves disease seveaity measurement in IJAERD.
Prof. Chaudhari V.S
1. Simulation & Implementation of Wireless Routing Protocolin IJIRAE.
2. Simulation & Performance Analysis of Mobile Ad-hoc Network Routing Protocolin IJARCET.
Prof. S. N. Akaram
1. Lane Detection for Departure Using Haugh Transform for Driving Assistance in IJSRST
Prof Vikhe N.B
1. QueRIE:System for personalized Query Recommendation in CPGCON 2015 MET-Nashik.
1. Automatic Red Blood Cell and White Blood Cell Counting using Image Processing
2. Technique along with Map Reduce Algorithm: A Preliminary Studyin NCMOC-2015 VIT,Pune.
1. Denial of Service attack detection system by combine approach of Naive bayes and Improved K-means Clustering in Cpgcon2015 MET, Nashik.
Prof. Londhe D. R.
1. Product Aspect Ranking on the Consumers Reviews in CPGCON 2016 PCCOE-Pune
1. Modelling and Optimization process parameter of EDM using A15P304
1. Computer oriented Numerical Methods (Pune University)
2. Metrology and Quality Control(Pune University)
3. Mechatronics (Pune University)
4. Numerical Techniques (Mumbai University)
5. Numerical Methods in Engineering (Punjab Tech.University)
6. Mechanical measurement and control(Gujrat University)
7. Numerical Methods and Statistical Techniques(UPTU University)
8. Engineering Metrology ( Anna University)
9. Mechanical Measurement and System(UPTU University)
10. Applied Num.Technique& Computing (MDU University)
11. Numerical Methods and Computer Programming (Pune University)
12. Numerical Methods and Optimization Techniques (Mumbai University)
13. Statistical and Numerical Methods (Punjab Tech. University)
14. Numerical and Statistical Methods for computer Engg.(Gujrat University)
15. Applied Numerical Methods( Shivaji University)
16. Numerical methods and Optimization( Pune University)